Programme
blocks
Wash block sequence is predefined and is the same as in the
programme chart (see "Programme chart").
–
Pre-wash 1
to
3
Pre-washing removes coarse soiling and foaming agents.
–
Main wash 1
and
2
Depending on wash load cleaning generally occurs at temperatures
between 50 °C and 85 °C with the addition of appropriate cleaning
agent.
Interim rinse 1
4
–
to
In the interim rinse stages the chemical agents from the previous
wash blocks are rinsed away and neutralised where necessary by
the addition of neutralising agents.
Final rinse 1
2
–
to
To avoid deposits on the wash load demineralised (AD) water
should preferably be used if available for the final rinse.
–
Drying
Adequate drying reduces residual moisture on the load.
Programme settings
99