Altering A Programme - Miele PG 8583 Operating Instructions Manual

Programme settings
102

Altering a programme

You can alter all parameters which are identified as changeable in the
programme charts. Other settings can only be altered by Miele
Service.
A programme setting is altered in two steps:
– First the wash blocks must be reallocated to the programme or the
existing allocation confirmed again. Only allocated programme
blocks can be parameterised.
– Then the programme parameters can be altered.
Use this option to document all changes to factory settings in case
of a subsequent Service call requirement.
Changing programme parameters on a validated machine will
necessitate a renewed performance validation.
...
Programme settings

Change programme

Change programme
Select the programme you want to alter.

For more information see "Allocating wash blocks".
Universal
Standard