Test Program - Miele PG 8583 Operating Instructions Manual

Additional settings
Renaming a
dispensing
system
88
If necessary, you can add an additional term to the designations of
the dispensing systems "
designation "DOS" with the associated number cannot be changed.
Use this option to document all changes to factory settings in case
of a subsequent Miele Service call requirement.
If the option
– Change name
has been selected, the display changes to the following view:
Change name
The current name is shown on the second line of the display. This can
be changed using the options shown in the bottom line. The top line
shows which option has been selected from the bottom line.
Names may consist of up to 15 characters including spaces. The
following options are available:
– Letters from A to
each new word will start with a capital letter.
0
– Numbers from to
– Space characters .
– Use the  symbol to delete the last position.
– The name is saved when the
The display will then revert to the initial menu.
– The  symbol in the display or the  button end the process
without saving the name change. The display reverts to the initial
menu.
Use the arrow buttons  (right) and  (left) to move the cursor to

the option you require.
Confirm each entry with OK.


Test program

Various programs are available for monitoring cleaning performance
in routine testing.
See "Maintenance" for more information on these programs.
DOS1
" etc., e.g. "
Z ;
9
.
OK
symbol in the display is selected.
DOS1 detergent
". The