Drying Assistance - Miele PG 8583 Operating Instructions Manual

Operation
Drying assistance The additional "Drying assistance" function accelerates the drying
Activating and
deactivating drying
60
process at the end of the programme.
If drying assistance has been activated the door will automatically
open a few centimetres at the end of the programme to release steam
from the cabinet. The load will then be dried using passive heat given
off by the residual heat in the cabinet.
This method of drying does not comply with the requirements of
EN ISO 15883-1/-2. For this reason, items must be dried separately
before further processing (sterilisation) or storage.
The drying function can be pre-selected for all programmes with a
drying phase or can be retrospectively switched on or off every time a
programme is selected (see "Settings  / Drying").
Drying is activated or deactivated prior to programme start by
pressing the  button. The LED in the  button indicates whether
the additional function is on or off. The drying time of the programme
can also be changed.
When the drying function is activated, the programme runs approx.
2 minutes longer.
Select a programme.

Press the  button before starting the programme. The LED in the

button will indicate whether the drying function is switched on or
off.