Download Print this page
   

Advertisement

Installationsplan / Installation plan
Installatietekening
Plan d`installation
Pianta di installazione
Materialnummer
Änderungsstand
Änderungsnr.
Datum Zeichnung
Datum Legende
Freigabe
Installation plan PG 8535
Version: 01.10.2010
Plano de instalación
Plano de instalação
Σχέδιο εγκατάστασης
PG 8535
/
Mat. no.
/
Version
/
Alteration number
/
Drawing Date
/
Legend Date
/
Approval
Asennusohje
Installasjonsplan
Installationsplan
Name:
USA
7889630
00
A13444
01.10.2010
01.10.2010
Götza
Page 1

Advertisement

   Also See for Miele PG 8535

   Related Manuals for Miele PG 8535

   Summary of Contents for Miele PG 8535

  • Page 1

    Pianta di installazione Installationsplan Σχέδιο εγκατάστασης PG 8535 Materialnummer Mat. no. 7889630 Änderungsstand Version Änderungsnr. Alteration number A13444 Datum Zeichnung Drawing Date 01.10.2010 Datum Legende Legend Date 01.10.2010 Freigabe Approval Name: Götza Installation plan PG 8535 Version: 01.10.2010 Page 1...

  • Page 2

    Length of supply lead without plug Voltage V/Hz AC 230/50 Rated load Fuse rating 1 x 30 Min. supply lead cross-section mm² 3 x 4.0 Length of supply lead (H05(07)RN-F) without plug Installation plan PG 8535 Version: 01.10.2010 Page 2...

  • Page 3

    Length of supply lead (H05(07)RN-F) without plug Voltage V/Hz AC 200/60 Rated load Fuse rating 2 x 30 Min. supply lead cross-section mm² 3 x 4.0 Length of supply lead (H05(07)RN-F) without plug Installation plan PG 8535 Version: 01.10.2010 Page 3...

  • Page 4

    (optional) Ethernet interface: A RJ45 plug is available on the rear of the washer. Install RJ45 socket in vicinity of machine. Cable supplied on site. Connections/installation must comply with IEC 60950. Installation plan PG 8535 Version: 01.10.2010 Page 4...

  • Page 5

    Connection thread (on site) Inch ¾ external
 (USA: 11.5 NH) Length of connection hose (supplied) 1500 Length of steam condenser connection hose (supplied) 1500 DVGW certification. Direct connection without fuse box permissible. Installation plan PG 8535 Version: 01.10.2010 Page 5...

  • Page 6

    Installation should only be carried out by authorised fitters in accordance with valid regulations! Observe installation instructions when installing machine! All rights reserved! Measurements in mm Änderungsnr. Datum Bezeichnung: A13444 01.10.2010 Einführung Installation plan PG 8535 Version: 01.10.2010 Page 6...

Comments to this Manuals

Symbols: 0
Latest comments: