Checking Mobile Units, Baskets, Modules And Inserts - Miele PG 8583 Operating Instructions Manual

Maintenance of
mobile units,
baskets, modules
and inserts

Checking mobile units, baskets, modules and inserts

Mobile units, baskets, modules and inserts should be checked daily
to make sure they are functioning correctly. The machine is supplied
with a check list.
Check the following points:
– Are the mobile unit or basket rollers in good condition, and are they
securely attached to their mobile units or baskets?
– Are the water connectors present and undamaged?
– Are height-adjustable water connectors adjusted to the correct
height and securely fixed?
– Are all injector nozzles, irrigation sleeves and hose adaptors
securely attached to mobile units, baskets or modules?
– Are all injector nozzles, sleeves, and hose adapters clear so that
wash fluid can flow through unhindered?
– Are all caps and fasteners securely attached to the irrigation
sleeves?
– Are end caps present and securely located for all modules and
injector manifolds?
– Are the locking caps in the water connectors of mobile units and
baskets working properly?
and where applicable:
– Make sure that the spray arms rotate freely.
– Make sure the spray arm jets are free of any blockages. See
"Cleaning the spray arms".
– Make sure that the magnets integrated into the spray arms have no
metallic objects sticking to them.
– Check whether the tubular filters need to be cleaned or filter plates,
e.g. in an E 478/1 need to be replaced.
The machine should be serviced every 1000 hours of operation, or
at least once a year by Miele Service.
Maintenance
123