Drying Assistance - Miele PG 8583 Operating Instructions Manual

Drying assistance The additional "Drying assistance" function accelerates the drying
Wash cabinet
cooldown phase
process at the end of the programme.
If drying assistance has been activated the door will automatically
open a few centimetres at the end of the programme to release steam
from the cabinet. The load will then be dried using passive heat given
off by the residual heat in the cabinet.
This method of drying does not comply with the requirements of
EN ISO 15883-1/-2. For this reason, items must be dried separately
before further processing (sterilisation) or storage.
A cooldown pause follows the wash phase. During this pause, water
vapour is extracted from the wash cabinet and condensed by the
steam condenser. This reduces the moisture level in the wash
cabinet, which promotes drying. In addition, this cools the wash
cabinet slightly.
...
Cabinet cooling down time

The setting value is entered in increments of 1 minute. The possible
range is shown in the bottom line of the display.
Use the arrow buttons  (higher) and  (lower) to set the cooling

down duration.
Press OK to save the setting.

Cabinet cooling time
0 Min
Min)
(0 - 30
Programme settings
111