Unsatisfactory Cleaning And Corrosion - Miele PG 8583 Operating Instructions Manual

Problem
Obstruction sensor
Emergency release

Unsatisfactory cleaning and corrosion

Problem
There are white deposits
on the wash load.
Cause and remedy
Protruding wash load items or objects are blocking the
door, e.g. towels.
The door was closed before the door lock rail was fully
retracted.
Open the door.

Remove all objects and sort the wash load so that it

does not obstruct the door.
The door lock rail must be fully retracted before you

close the door again.
The door was opened using the emergency release.
See "Opening the door using the emergency release".

Cause and remedy
The water softener is set too low.
Set the water softener to the correct water hardness.

There is no salt in the salt reservoir.
Refill the reactivation salt.

The quality of the water for the final rinse was insufficient.
Use water with a low conductance value.

If the machine is connected to a water softening

cartridge, check it and replace as necessary.
The water from the AD water connection is not sufficiently
softened.
Check the pre-selected water softening units. If

necessary, replace the water softening cartridge with a
new one.
Problem solving guide
137