Programme settings
Setting the
concentration
level
108
Up to two chemical agents can be dispensed in each wash block. It is
also possible to control the same dispensing system twice, excluding
the powder detergent dispenser (where available).
...
Dosage 1
or
Dosage 2
Dispensing system
Dispensing system
The number of dispensing systems can vary according to model and
the number of connected DOS modules.
Select an option using the and arrow buttons and save your
choice with OK.
Then you can set the dispensing concentration in % (percent).
Adjustment is in 0.01% increments. The possible range is shown in
the bottom line.
Use the arrow buttons (higher) and (lower) to set the
dispensing concentration.
Press OK to save the setting.
DOS 1 ...
DOS ...
DOS
0.30
%
(0.05 - 2.00 %)