Cleaning The Machine; Cleaning The Control Panel; Cleaning The Door And The Door Seal; Cleaning The Wash Cabinet - Miele PG 8583 Operating Instructions Manual

Maintenance
Cleaning the
control panel
Cleaning the door
and the door seal
Cleaning the
wash cabinet
Cleaning the door
front
Preventing
re-soiling
122

Cleaning the machine

 Never clean the machine or near vicinity with a water hose or a
pressure washer.
 Do not use cleaning agents containing ammonia or thinners on
stainless steel surfaces!
These agents can damage the surface material.
Do not use any abrasive materials or general-purpose cleaners to
clean the control panel.
These can cause considerable damage to the glass and plastic
surfaces and to the onset control buttons.
Clean the control panel with a damp cloth and a little washing-up

liquid or with a non-abrasive stainless steel cleaner.
Proprietary glass or plastic cleaning agents can also be used to

clean the display.
For surface disinfection use a listed agent recommended by the

manufacturer.
Wipe the door seal regularly with a damp cloth to remove soiling.

Have damaged or leaking door seals replaced by Miele Service.
Remove any soiling from the door sides and hinges.

Regularly clean the groove in the plinth panel under the door with a

damp cloth.
The wash cabinet is largely self-cleaning, however if deposits should
start to build up, contact Miele Service.
To clean the stainless steel front, use a damp cloth with a solution

of washing-up liquid and hot water, or with a non-abrasive cleaning
agent for use on stainless steel.
To help prevent re-soiling of stainless steel surfaces (fingerprints,

etc.), a suitable stainless steel conditioner can be used after
cleaning.