Miele PG 8583 Operating Instructions Manual page 79

Change code The code consists of a four digit number and is set by the user. Each
digit can be programmed freely between 0 and 9.
 When a new code is entered the old code is overwritten and is
permanently deleted. Therefore it cannot be reinstated.
If a code is lost, a new code must be issued by Miele Service.
Open the menu as follows:

 button
 Further settings
 Code
Change code

Use the arrow buttons  (higher) and  (lower) to enter the relevant

digits.
Confirm each digit individually with the OK button.

When the OK button is pressed, the display jumps automatically to
the next input position. You cannot go back to the previous entry. If a
mistake is made, the process must be cancelled using the  button
and repeated. Entered digits are replaced by a
The code is saved to memory once you have confirmed the last digit.
PIN code
Further settings
*
symbol.
79