Cancelling A Programme; Programme Cancelled Due To A Fault; Cancelling A Programme Manually - Miele PG 8583 Operating Instructions Manual

Programme
cancelled due to a
fault
Cancelling a
programme
manually
Restarting the
programme

Cancelling a programme

 If a programme is cancelled, the items in the washer-disinfector
must be reprocessed again.
 Be careful when opening the door.
The load could be hot. Danger of scalding, burning, and chemical
burns.
The programme stops and an error message appears on the display.
Take appropriate steps to resolve the fault, depending on its cause
(see "Problem solving guide").
A programme which is already running should only be cancelled if
strictly necessary, e.g. if the load is moving about significantly.
Press and hold the Start/Stop button until the display changes to

the following view:
Cancel programme
No
Yes
Yes using the  and  arrow buttons.
Select

By pressing the OK button the programme is cancelled. Entry of a

PIN code may also be required (see "Further settings/Code").
If no button is pressed for several seconds, or if the process is
cancelled using the  button, the display will revert to the
programme sequence display.
Before starting the programme, check to see whether any more

powder cleaning agent is required.
Start the programme again or select a new programme.

Operation
63