Altering A Program; Allocating Wash Blocks - Miele PG 8583 Operating Instructions Manual

Altering a program

You can alter all parameters which are identified as changeable in the
program charts. Other settings can only be altered by Miele Service.
A program setting is altered in two steps:
– First the wash blocks must be reallocated to the program or the
existing allocation confirmed again. Only allocated program blocks
can be parameterized.
– Then the program parameters can be altered.
Use this option to document all changes to factory settings in case
of a subsequent Miele Service call requirement.
...
Program settings

Change program

Change program
Select the program you want to alter.

For more information, see "Allocating wash blocks."
Normal plus
Standard
Program settings
101