HP ProLiant BL p-Class GbE2 Command Reference Manual page 30

6. At the prompt, enter y to enable the IP interface, or n to leave it disabled:
Enable IP interface? [y/n]
7. The system prompts you to configure another interface:
Enter interface number:
Repeat the steps in this section until all IP interfaces have been configured. When all
interfaces have been configured, press the Enter key without specifying any interface
number.
Default Gateways
1. At the prompt, set the default gateway for configuration, or skip default gateway
configuration:
IP default gateways:
Enter default gateway number:
Enter the number for the default gateway to be configured. To skip default gateway
configuration, press the Enter key without typing a gateway number.
2. At the prompt, enter the IP address for the selected default gateway:
Current IP address:
Enter new IP address:
Enter the IP address in dotted decimal notation, or press the Enter key without specifying
an address to accept the current setting.
3. At the prompt, enter y to enable the default gateway, or n to leave it disabled:
Enable default gateway? [y/n]
4. Repeat steps 1 through 3 if you want to configure the other gateway. If you do not want
to configure the other gateway, press the Enter key without specifiying the gateway
number.
HP ProLiant BL p-Class GbE2 Interconnect Switch Command Reference Guide
HP CONFIDENTIAL Codename: Strawberry Part Number: 331404-001 Last Saved On: 7/17/03 12:50 PM
(1-2)
0.0.0.0
First-Time Configuration
3-9