Port Mirroring - HP ProLiant BL p-Class GbE2 Command Reference Manual

The Configuration Menu
Table 6-18: SNMP Configuration Menu Options
Command
trap2 <new SNMP trap host IP
address (such as, 192.4.17.101)>
t1comm <new trap host community
string, maximum 32 characters>
t2comm <new trap host community
string, maximum 32 characters>
auth disable|enable
linkt <port> [disable|enable]
cur

Port Mirroring

Command: /cfg/pmirr
[Port Mirroring Menu]
The Port Mirroring Configuration Menu is used to configure, enable, and disable the
monitored port. When enabled, network packets being sent and/or received on a target port
are duplicated and sent to a monitor port. By attaching a network analyzer to the monitor
port, you can collect detailed information about your network performance and usage. Port
mirroring is disabled by default.
NOTE: Refer to Appendix A, "Troubleshooting Tools," in the HP ProLiant BL p-Class GbE2
Interconnect Switch Application Guide for information on how to use port mirroring.
The following table describes the Port Mirroring Configuration Menu options.
Table 6-19: Port Mirroring Configuration Menu Options
Command
mirror disable|enable
monport <port number>
cur
6-24
HP CONFIDENTIAL Codename: Strawberry Part Number: 331404-001 Last Saved On: 7/17/03 12:57 PM
mirror - Enable/Disable Mirroring
monport - Monitoring Port based PM Menu
cur - Display All Mirrored and Monitoring Ports
HP ProLiant BL p-Class GbE2 Interconnect Switch Command Reference Guide
continued
Description
Configures the IP address of the second SNMP
trap host using dotted decimal notation.
Configures the community string for the first trap
host. The default community string for the first
trap host is public.
Configures the community string for the second
trap host. The default community string for the
second trap host is public.
Enables or disables the use of the system
authentication trap facility. The default setting is
disable.
Enables or disables the sending of SNMP link
up and link down traps. The default setting is
enable.
Displays the current STP port parameters.
Description
Enables or disables port mirroring
Displays port mirroring menu.
Displays current settings of the mirrored and
monitoring ports.