Snmp Configuration - HP ProLiant BL p-Class GbE2 Command Reference Manual

SNMP Configuration

Command: /cfg/snmp
[SNMP Menu]
The GbE Interconnect Switch software supports SNMP-based network management. If you
are running an SNMP network management station on your network, you can manage the
GbE2 Interconnect Switch using SNMP MIBs. Refer to the HP ProLiant BL p-Class GbE2
Interconnect Switch User Guide for a list of SNMP MIBs.
The following table describes the SNMP Configuration Menu options.
Table 6-18: SNMP Configuration Menu Options
Command
name <new string, maximum 64
characters>
locn <new string, maximum 64
characters>
cont <new string, maximum 64
characters>
rcomm <new SNMP read community
string, maximum 32 characters>
wcomm <new SNMP write community
string, maximum 32 characters>
trap1 <new SNMP trap host IP
address (such as, 192.4.17.101)>
HP ProLiant BL p-Class GbE2 Interconnect Switch Command Reference Guide
HP CONFIDENTIAL Codename: Strawberry Part Number: 331404-001 Last Saved On: 7/17/03 12:57 PM
name - Set SNMP "sysName"
locn - Set SNMP "sysLocation"
cont - Set SNMP "sysContact"
rcomm - Set SNMP read community string
wcomm - Set SNMP write community string
trap1 - Set first SNMP trap host address
trap2 - Set second SNMP trap host address
t1comm - Set community string for first trap host
t2comm - Set community string for second trap host
auth - Enable or disable SNMP "sysAuthenTrap"
linkt - Enable or disable SNMP link up/down trap
cur - Display current SNMP configuration
Description
Configures the name for the system. The name
can have a maximum of 64 characters.
Configures the name of the system location.
The location can have a maximum of 64
characters.
Configures the name of the system contact. The
contact can have a maximum of 64 characters.
Configures the SNMP read community string.
The read community string controls SNMP "get"
access to the GbE2 Interconnect Switch. It can
have a maximum of 32 characters. The default
read community string is public.
Configures the SNMP write community string.
The write community string controls SNMP "set"
and "get" access to the GbE2 Interconnect
Switch. It can have a maximum of 32
characters. The default write community string
is private.
Configures the IP address of the first SNMP trap
host using dotted decimal notation. The SNMP
trap host is the device that receives SNMP trap
messages from the GbE2 Interconnect Switch.
The Configuration Menu
continued
6-23