Arp Cache Options - HP ProLiant BL p-Class GbE2 Command Reference Manual

ARP Cache Options

Command: /maint/arp
[Address Resolution Protocol Menu]
The following table describes the Address Resolution Protocol Menu options:
Table 9-5: Address Resolution Protocol Menu Options
Command
find <IP address (such as,
192.4.17.101)>
port <port number>
vlan <VLAN number>
refpt <port number>
dump
add <IP address> <MAC address>
<VLAN number> <port>
del <IP address (such as,
192.4.17.101)>
clear
addr
NOTE: To display all ARP entries currently held in the GbE2 Interconnect Switch, or a portion
according to one of the options listed on the menu above (find, port, vlan, refpt, dump), refer to the
"ARP Information" section in Chapter 4.
HP ProLiant BL p-Class GbE2 Interconnect Switch Command Reference Guide
HP CONFIDENTIAL Codename: Strawberry Part Number: 331404-001 Last Saved On: 7/17/03 1:11 PM
find - Show a single ARP entry by IP address
port - Show ARP entries on a single port
vlan - Show ARP entries on a single VLAN
refpt - Show ARP entries referenced by a single port
dump - Show all ARP entries
add - Add a permanent ARP entry
del - Delete an ARP entry
clear - Clear ARP cache
addr - Show ARP address list
Usage
Shows a single ARP entry by IP address.
Shows ARP entries on a single port.
Shows ARP entries on a single VLAN.
Shows all ARP entries referenced by a single port.
Shows all ARP entries.
Adds a single ARP entry to GbE2 Interconnect
Switch memory.
Removes a single ARP entry from GbE2
Interconnect Switch memory.
Clears the entire ARP list from GbE2 Interconnect
Switch memory.
Shows the list of IP addresses which the GbE2
Interconnect Switch will respond to for ARP
requests.
The Maintenance Menu
9-5