HP ProLiant BL p-Class GbE2 Command Reference Manual page 14

The Command Line Interface
Table 1-2: User Access Levels
User Account
User
Operator
Administrator
NOTE: With the exception of the "admin" user, setting the password to an empty value can disable
access to each user level. By default, user and admin are enabled.
Once you enter the administrator password and it is verified, the Main Menu of the CLI is
displayed with administrator privileges. Refer to Chapter 2 for a summary of the Main Menu
options.
[Main Menu]
>> Main#
1-6
HP CONFIDENTIAL Codename: Strawberry Part Number: 331404-001 Last Saved On: 7/17/03 12:46 PM
Description and Tasks Performed
The user has no direct responsibility for GbE2 Interconnect
Switch management. He or she can view all GbE2
Interconnect Switch status information and statistics, but
cannot make any configuration changes to the GbE2
Interconnect Switch.
The operator manages all functions of the GbE2
Interconnect Switch. The operator can reset ports or the
entire GbE2 Interconnect Switch. By default, the operator
account is disabled and has no password.
The super user administrator has complete access to all
menus, information, and configuration commands on the
GbE2 Interconnect Switch, including the ability to change
both the user and administrator passwords.
info - Information Menu
stats - Statistics Menu
cfg - Configuration Menu
oper - Operations Command Menu
boot - Boot Options Menu
maint - Maintenance Menu
diff - Show pending config changes
apply - Apply pending config changes [global command]
save - Save updated config to FLASH [global command]
revert - Revert pending or applied changes [global command]
exit - Exit [global command, always available]
HP ProLiant BL p-Class GbE2 Interconnect Switch Command Reference Guide
Password
user
admin
[global command]