Uploading A Software Image From Your Gbe2 Interconnect Switch - HP ProLiant BL p-Class GbE2 Command Reference Manual

The Boot Options Menu
Uploading a Software Image from Your GbE2 Interconnect
Switch
You can upload a software image from the GbE2 Interconnect Switch to a TFTP server.
1. At the Boot Options# prompt, enter:
Boot Options# ptimg
2. The system prompts you for information. Enter the desired image:
Enter name of switch software image to be uploaded
["image1"|"image2"|"boot"]: <image> <hostname or server-IP-addr>
<server-filename>
3. Enter the name or the IP address of the TFTP server:
Enter hostname or IP address of TFTP server: <server name or IP
address>
4. Enter the name of the file into which the image will be uploaded on the TFTP server:
Enter name of file on TFTP server: <filename>
5. The system then requests confirmation of what you have entered. To have the file
uploaded, enter y.
image2 currently contains Software Version 1.0.1.0
Upload will transfer image2 (1889411 bytes) to file "test"
Confirm upload operation [y/n]: y
8-4
HP CONFIDENTIAL Codename: Strawberry Part Number: 331404-001 Last Saved On: 7/17/03 1:10 PM
on TFTP server 192.1.1.1.
HP ProLiant BL p-Class GbE2 Interconnect Switch Command Reference Guide