HP ProLiant BL p-Class GbE2 Command Reference Manual page 124

link status
command 4-11
display setting 4-2
duplex mode 4-2, 4-11
port speed 4-2, 4-11
linkt (SNMP option) 6-24
LISTENING (port state) 4-13
log, syslog messages 6-7
login notice 6-5
M
Main Menu 2-1
Maintenance Menu 9-1
management processor (MP)
display MAC address 4-2, 4-9
statistics 5-11
trace buffer 9-4
mask, IP interface subnet address 6-15
media access control (MAC) address
ARP information 4-5
display address 1-3, 4-9
FDB information 4-7
FDB manipulation 9-3
location 4-2
Miscellaneous Debug Menu 9-4
mmask, system option 6-5
mnet, system option 6-5
monitor port 6-24
MP packet statistics 5-12
MP-specific SFD statistics 5-14
N
Network Time Protocol (NTP)
synchronization 6-10
time zone 6-10
Network Time Protocol (NTP) Server Menu 6-10
null modem cable 1-2
O
online help 2-3
operating mode, configuration 6-13
Operations Menu 7-1
P
panic
command 9-7
switch 9-1
passwords, defaults 1-5, 3-11
ping command 2-4
popd command 2-4
port configuration 6-12
Port Menu
HP ProLiant BL p-Class GbE2 Interconnect Switch Command Reference Guide
COMPAQ CONFIDENTIAL Codename: Strawberry Part Number: 331404-001 Last Saved On: 7/17/03 1:12 PM
configuration options 6-12, 6-13
Gigabit Ethernet (gig) configuration 6-12
port mirroring, configuration 6-24
port number 4-11
port speed 4-2, 4-11
port statistics 5-2
port trunking configuration 6-26
ports
disable (temporarily) 6-14
information 4-15
IP status 4-4
membership of the VLAN 4-14
priority 4-13
STP port priority 6-22
priority (STP port option) 6-22
prisrv, primary radius server 6-9
ptcfg (TFTP save command) 6-27
pushd command 2-4
pwd command 2-4
Q
quiet (screen display option) 2-4
R
RADIUS Server Menu 6-9
read community string (SNMP option) 6-23
reboot 9-1, 9-7
restarting switch setup 3-3
retries, radius server 6-9
retry, health checks for default gateway 6-16
revert apply command 2-3, 6-3
revert command 2-3, 6-3
S
save command 2-3, 6-3, 8-5
save n command 2-3
secret, radius server 6-9
secsrv, secondary radius server 6-9
Secure Shell (SSH)
encryption and authentication methods 1-4
supported clients 1-4
Secure Shell Server (SSHD) Menu 6-7
Setup utility
basic system configuration 3-3
bootstrap protocol (BOOTP) 3-5
configuration 6-27
introduction 3-1
IP configuration 3-8
port auto-negotiation mode 3-6
port configuration 3-5
restart 3-3
Spanning Tree Protocol 3-5
start 3-2
Index
Index-3