Menu Basics; Introduction; The Main Menu - HP ProLiant BL p-Class GbE2 Command Reference Manual

Introduction

The HP ProLiant BL p-Class GbE2 Interconnect Switch CLI is used for viewing switch
information and statistics. In addition, the administrator can use the CLI for performing all
levels of GbE2 Interconnect Switch configuration.
To make the CLI easy to use, the various commands have been logically grouped into a series
of menus and submenus. Each menu displays a list of commands and/or submenus that are
available, along with a summary of what each command will do. Below each menu is a
prompt where you can enter any command appropriate to the current menu.
This chapter describes the Main Menu commands, and provides a list of commands and
shortcuts that are commonly available from all the menus within the CLI.

The Main Menu

The Main Menu displays after a successful connection and login. The following table shows
the Main Menu for the administrator login. Some features are not available under the user
login.
[Main Menu]
HP ProLiant BL p-Class GbE2 Interconnect Switch Command Reference Guide
HP CONFIDENTIAL Codename: Strawberry Part Number: 331404-001 Last Saved On: 7/17/03 12:48 PM
info - Information Menu
stats - Statistics Menu
cfg - Configuration Menu
oper - Operations Command Menu
boot - Boot Options Menu
maint - Maintenance Menu
diff - Show pending config changes
apply - Apply pending config changes [global command]
save - Save updated config to FLASH [global command]
revert - Revert pending or applied changes [global command]
exit - Exit [global command, always available]

Menu Basics

[global command]
2
2-1