HP ProLiant BL p-Class GbE2 Command Reference Manual page 33

First-Time Configuration
3. From the Configuration Menu, use the following command to select the System Menu:
>> Configuration# sys
The System Menu is displayed.
[System Menu]
4. Enter the following command to set the administrator password:
System# user/admpw
5. Enter the current administrator password at the prompt:
Changing ADMINISTRATOR password; validation required...
Enter current administrator password:
NOTE: If you forget your administrator password, call your technical support representative for
help using the password fix-up mode.
6. Enter the new administrator password at the prompt:
Enter new administrator password:
7. Enter the new administrator password, again, at the prompt:
Re-enter new administrator password:
8. Apply and save your change by entering the following commands:
System# apply
System# save
3-12
HP CONFIDENTIAL Codename: Strawberry Part Number: 331404-001 Last Saved On: 7/17/03 12:50 PM
syslog - Syslog Menu
sshd - SSH Server Menu
radius - RADIUS Authentication Menu
ntp - NTP Server Menu
date - Set system date
time - Set system time
idle - Set timeout for idle CLI sessions
snmp - Set SNMP access control
wport - Set Web server port number
notice - Set login notice
bannr - Set login banner
mnet - Set management network
mmask - Set management netmask
tnport - Set Telnet server port number
hprompt - Enable/disable display hostname(sysName)in CLI prompt
bootp - Enable/disable use of BOOTP
http - Enable/disable HTTP (Web) access
user - User Access Control Menu (passwords)
cur - Display current system-wide parameters
HP ProLiant BL p-Class GbE2 Interconnect Switch Command Reference Guide