Setup; Dump; Saving The Active Gbe2 Interconnect Switch Configuration - HP ProLiant BL p-Class GbE2 Command Reference Manual

Setup

Command: /cfg/setup
The Setup utility steps you through configuring the system date and time,
spanning tree, port speed/mode, VLAN parameters, and IP interfaces.
To start the Setup utility, at the Configuration# prompt, enter:
Configuration# setup
For a complete description of how to use
Configuration."
NOTE: The Setup utility is available through the command line interface only.

Dump

Command: /cfg/dump
The dump program writes the current GbE2 Interconnect Switch configuration to the terminal
screen. To start the dump program, at the Configuration# prompt, enter:
Configuration# dump
The configuration is displayed with parameters that have been changed from the default
values. The screen display can be captured, edited, and placed in a script file, which can be
used to configure other GbE2 Interconnect Switches. Paste the configuration commands from
the script file at the command line prompt of the GbE2 Interconnect Switch. The active
configuration can also be saved or loaded via TFTP.

Saving the Active GbE2 Interconnect Switch Configuration

Command: /cfg/ptcfg <TFTP server> <filename>
When the ptcfg command is used, the active configuration commands of the GbE2
Interconnect Switch (as displayed using /cfg/dump) will be uploaded to the specified script
configuration file on the TFTP server. To start the GbE2 Interconnect Switch configuration
upload, at the Configuration# prompt, enter:
Configuration# ptcfg <TFTP server> <filename>
Where <TFTP server> is the TFTP server IP address or hostname, and <filename> is the
name of the target script configuration file.
NOTE: The output file is formatted with line-breaks but no carriage returns. The file cannot be viewed
with editors that require carriage returns (such as Microsoft Notepad).
HP ProLiant BL p-Class GbE2 Interconnect Switch Command Reference Guide
HP CONFIDENTIAL Codename: Strawberry Part Number: 331404-001 Last Saved On: 7/17/03 12:57 PM
Setup
, refer to Chapter 3, "First-Time
The Configuration Menu
BOOTP
, IP,
6-27