HP ProLiant BL p-Class GbE2 Command Reference Manual page 86

The Configuration Menu
NOTE: Refer to the HP ProLiant BL p-Class GbE2 Interconnect Switch Application Guide for
information on SSH.
The following table describes the SSHD Configuration Menu options.
Table 6-4: SSHD Configuration Menu Options
Command
intrval <interval (in
hours), 1-24, 0 to
disable>
scpadm
hkeygen
skeygen
sshport <TCP port number>
ena
dis
on
off
cur
6-8
HP CONFIDENTIAL Codename: Strawberry Part Number: 331404-001 Last Saved On: 7/17/03 12:57 PM
Description
Defines interval for auto-generating the RSA server key.
The GbE2 Interconnect Switch will auto-generate the RSA
server key at the interval defined in this command. The
value of zero (0) means the RSA server key auto-generation
is disabled. If the switch has been busy performing any
other key generation and the assigned time of interval
expires, the RSA server will skip generating the key.
Defines the administrator password that is for Secure Copy
(SCP) only. Typically, SCP is used to copy files from one
machine to the other securely. In the GbE2 Interconnect
Switch, SCP is used to download and upload the switch
configuration using secure channels.
Generates the RSA host keys manually. The GbE2
Interconnect Switch creates this key automatically while
configuring the switch with Secure Shell (SSH). But you can
generate the key manually by using this command if you
need to overwrite the key for security reasons. The
command will take effect immediately without executing the
apply command.
Generates the RSA server key. The GbE2 Interconnect
Switch creates this key automatically while configuring the
switch with Secure Shell (SSH). You can generate the key
manually by using this command if you need to overwrite
the key for security reasons. The command will take effect
immediately without executing the apply command.
Sets the SSH server port number.
Enables the SCP apply and save.
Disables the SCP apply and save. This is the default for
SCP.
Enables the SSH server.
Disables the SSH server. This is the default for the SSH
server.
Displays the current SSH server configuration.
HP ProLiant BL p-Class GbE2 Interconnect Switch Command Reference Guide