Configuring Serial Ports - Sartorius Cubis Series User Manual

Configuring Serial Ports

The available ports are displayed.
y
Select the port you want to configure.
t
Configure all settings for this port.
t
To save the settings, select
t
Configuration Options for the Serial Ports
The following operating modes are available for this port:
– No function; the interface is blocked
– xBPI
– SBI
– Second display (SBI)
– Printer output
– SICS
Factory settings are marked with an asterisk (*).
h
Configuration Options for xBPI Operating Mode
For this operating mode, you can only configure baud rate and number of stop bits.
– Selected protocol: No protocol (fixed setting)
– Baud rate: *
9600
– Data bits: 8 (fixed setting)
– Parity: Odd (fixed setting)
– Stop bits: * or
1
Configuration Options for SBI Operating Mode and Second Display
You can change all settings for this operating mode.
– Selected protocol:
*
Hardware handshake RTS; CTS
– Baud rate:
300
– Data bits: or *
7
– Parity: / *
None
– Stop bits: * or
1
– Log data: *
Turn off
.
Save
to
115200 baud
stop bits
2
No protocol / Software handshake XON; XOFF
to (to 115200 baud for second display), *9600
19200 baud
8
/
Odd Even
stop bits
2
/
Turn on
Interfaces
/
Cubis MSU User Manual 131