Sartorius Cubis Series User Manual page 84

Calculation
84 Cubis MSU User Manual
Executing a Task: Calculation
If you haven't already done so, go to Application Management.
D
t
y The task selection is displayed.
Select the desired task.
t
or
If the desired task is already marked, select
t
If you want to work with a variable formula, you can now enter or change
t
the formula.
Place the sample on the balance.
t
y The weight value is displayed.
To start the calculation, select
t
y The calculation results are displayed.
To return to the weight value display, select
t
If you want to carry out additional weighing and calculations using the same
t
formula, place the sample on the balance and then select
If you want to carry out additional weighing using a different formula, select
t
.
Back
You can now change the formula and then proceed as described above.
t
.
Start
.
Start
.
Weigh
Calc.