Sartorius Cubis Series User Manual page 111

Executing a Task: Checkweighing
If you haven't already done so, go to Application Management.
D
t
y The task selection is displayed.
Select the desired task.
t
or
If the desired task is already marked, select
t
Define check values by entry:
Select the input field Setp and enter the target.
t
Select the input field Min or Max and enter the minimum or maximum check
t
values.
or
Define check values with current load:
Place the weight on the weighing pan.
t
Select
More.
t
Select the field of the check value with the current weight value you want
t
to use.
If required, repeat the process with additional weights for the other check
t
values.
To exit the input mode without saving the value, select
t
t To start checkweighing, select
The entered check values are displayed graphically.
y
Place the object to be checked on the weighing pan.
t
Checkweighing
.
Start
Back
Start.
Cubis MSU User Manual
.
111