Accessories - Sartorius Cubis Series User Manual

Accessories

Accessories
Verifiable data printer for connection to RS-232, 25-pin. Accessory interface
Verifiable data printer with Bluetooth® (only with YDO01MS-B or option IB)
Paper rolls for printer YDP10-0CE; 5 rolls 50 m each
Color ribbon for YDP10-0CE and YDP10BT-0CE
Additional display, LCD, text size 13 mm, backlit
RS232C connection cable to connect PC with 9-pin COM interface, length 1.5 m
Standard operating procedure (SOP)
Infrared sensor for touchless function triggering (e.g., draft shield control)
Hand switch for printing, taring, or to use function keys, selection via menu, incl. T connector
Foot switch for printing, taring, or to use function keys, selection via menu, incl. T connector
Foot switch for the functions draft shield on/off (only in combination with DA and DI draft shield),
tare and print
Density determination kit for solids and liquids for weighing modules with a readability of < 1 mg
3-segment control display, red – green – red, for plus|minus measurements, incl. T connector
Barcode reader with connection cable, 120 mm reading range
Pipette calibration kit for models with 0.01 mg and 0.1 mg readability; hardware and software
Software for pipette calibration
RS232C data interface, 25-pin for connection of Cubis accessories
Bluetooth® data interface for wireless connection of the YDP10BT data printer or PC
RS232C data interface, 9-pin including PS/2 for connecting a PC or keyboard
Antistatic weighing pan, diameter 130 mm, for weighing modules with a readability of 0.1 mg or 0.01 mg
Support arm for 10/100 mg precision weighing modules for raising the operating unit
Weighing table made from synthetic stone, with vibration dampening
Wall console
Weighing table made from wood with synthetic stone for precise, reliable measurements
Display and control unit with backlit LC display and tactile keys
Display and control unit with backlit b/w graphic display and tactile navigation keys
Display and control unit with color TFT graphic display and touch screen
Display cable 3m, for separated setup of display and balance unit
Connection cable 3m, for connecting the electronics module and weigh cell on models MSx225
SartoCollect software for data communication between balance and PC
Sartorius OPC server for connecting all Sartorius Cubis balances
Requires 32-bit Microsoft Windows 2000 or XP with the current service packs.
(free download of a 30-day test version from the Sartorius website)
– Initial license
– Each additional license within an order
The brand name and logo for Bluetooth® wireless technology are owned by Bluetooth SIG Inc.
The use of this brand name and trademark by Sartorius AG is under license.
Other brand names and trade names belong to their respective owners.
176 Cubis MSU User Manual
YDP10-0CE
YDP10BT-0CE
6906937
6906918
YRD03Z
7357314
YSL07D
YHS01MS
YHS02
YFS01
YPE01RC
YDK01MS
YRD11Z
YBR03PS2
on request
on request
YDO01MS-R
YDO01MS-B
YDO01MS-P
YWP01MS
YDH01MS
YWT03
YWT04
YWT09
YAC01MSE
YAC01MSU
YAC01MSA
YCC01-MSD3
on request
YSC02
6289OPC
6289OPC-L