Sartorius Cubis Series User Manual page 110

Checkweighing
110 Cubis MSU User Manual
Define how the ports should be activated depending on the check results
t
*Ports not active
Within checkweighing range
are within the checkweighing range.
Ports always activated:
When stable and in checkweighing range
as soon as the balance becomes stable and the results are in the checkweighing
range.
The ports are always activated as soon as the balance has stabilized.
At stability:
Once at stability and in the checkweighing range
on a one-time basis (not dynamically) as soon as the balance has stabilized
and the results are in the checkweighing range; effective until the balance has been
unloaded.
Define whether or not the automatic counter for positive results should
t
be activated.
*No automatic counter
Counter for OK values:
An overview of all settings is displayed.
y
Check all settings and change as required.
t
A message asks whether you would like to add another application.
y
If required, select additional applications to be combined.
t
Now you will be prompted to configure the weighing and printing functions.
y
Check all settings and change as required.
t
Enter a short name and a description for the new task.
t
To save the new task, select
t
: Ports are only activated when the results
The ports are always activated with each weight value.
: The ports are only activated
All positive checked results are counted.
.
Save
: The ports are activated