Parameters In The "Connections / Interfaces / Serial Communication Over Network" (Ethernet) Menu; Certificates" Menu; Menu - Sartorius Cubis MCA Series Operating Instructions Manual

7.7.10 Parameters in the "Connections / Certificates" Menu
Parameter Setting Values
Trusted List of certification
certification authorities
authorities
Loading certification
authorities from a
connector
Device certificates List of device certificates
Loading device
certificates from a
connector
Trust unknown No (secure)
certification
Yes (insecure)*
authorities
* Factory setting
7.7.11 Parameters in the "Connections / Interfaces / Serial Communication over Network"
(Ethernet) Menu
Parameter Setting Values
Protocol Off*
SBI
SICS
xBPI
QAPP direct
miniSICS
Log On
communication
Off*
Port User input
* Factory setting
Explanation
Activates a trusted certification authority (CA), in order
to identify trusted servers, e.g., "GlobalSign".
Imports a certification authority, e.g., from a network server
or USB stick.
Activates a device certificate, e.g "GlobalSign".
Imports a certification authority for safe remote access to the
device website, e.g., from a network server or USB stick.
Explanation
Deactivates the serial transmission via Ethernet.
Enables SBI communication. The data is output to a PC
or control unit. Enables the use of ESC commands from a PC
to control the basic balance functions with ASCII protocol.
Enables SICS communication. The data is output to a PC
or control unit. Enables the use of commands from a PC to
control the basic balance functions with SICS protocol.
Extended range of commands to control numerous balance
functions with binary protocol for direct communication with
the weighing module.
Allows for the data input and output via a QAPP direct
connection from a network server or USB stick to a data
processing program. Only the special QAPPs, which are started
by a task, can use the interface for their purposes of input
and output.
Enables miniSICS communication. The data is output to a PC
or control unit. Enables the use of commands from a PC to
control the basic balance functions with the miniSICS protocol.
Activates the automatic data recording for this interface
(only activate for test purposes).
Deactivates the automatic data recording for this interface.
Saves the entered port number for the Ethernet interface.
Operating Instructions Cubis
System Settings
MCA 61
®