Sartorius Cubis Series User Manual page 98

Timer-controlled Functions
98 Cubis MSU User Manual
Specify whether or not there should be an automatic restart after
t
the timer-controlled function has been triggered.
*Off , no restart
On (restart automatically):
timer-controlled function has been carried out.
An overview of all settings is displayed.
y
Check all settings and change as required.
t
A message asks whether you would like to add another application.
y
If required, select additional applications to be combined.
t
Now you will be prompted to configure the weighing and printing functions.
y
Check all settings and change as required.
t
Enter a short name and a description for the new task.
t
To save the new task, select
t
Executing a Task: Timer-controlled Functions
If you haven't already done so, go to Application Management.
D
t
y The task selection is displayed.
Select the desired task.
t
or
If the desired task is already marked, select
t
If required, enter the time or interval
t
(hh:mm:ss, e.g., 00:00:30 for an interval of 30 seconds).
Follow the instructions on the display.
t
The timer is restarted as soon as the
.
Save
.
Start