Sartorius Cubis Series User Manual page 157

2
1
Place the panels in the packaging.
t
1. Place the upper draft shield panel into the packaging (handle upwards).
2. Place the side draft shield panel into the packaging (handle upwards).
3. Place the side draft shield panel into the packaging (handle downwards).
3
Insert the front foam pieces into the box, wedging the panels into the back
t
foam pieces.
Place the cardboard insert into the box.
t
Place the pan support into the opening.
t
Place the weighing pan on the pan support.
t
Shipping the Balance
Cubis MSU User Manual 157