Table of Contents
Advertisement
PICOe-HM650 Half-size PCIe CPU Card
Figure B-14: Select a Local Source Drive
Step 6:
Select a source partition (Part 1) from basic drive as shown in Figure B-15.
Then click OK.
Figure B-15: Select a Source Partition from Basic Drive
Step 7:
Select 1.2: [Recovery] NTFS drive and enter a file name called
(Figure B-16). Click Save. The factory default image will then be saved in the
selected recovery drive and named IEI.GHO.
WARNING:
The file name of the factory default image must be iei.GHO.
iei
Page 119
Advertisement
Table of Contents
