Multi-Terminal Lines - GE L60 Instruction Manual

8 THEORY OF OPERATION 8.1 OVERVIEW

8.1.8 MULTI-TERMINAL LINES

Up to this point these discussions have pertained principally to two-terminal lines. Phase comparison schemes are often
applied to lines having more than two terminals and those applications differ somewhat depending on the channel equip-
ment.
a) ON-OFF CHANNEL
The ON-OFF channel equipment is invariably used in blocking type carrier schemes similar to that of Figure 8-16. Since
this type of scheme utilizes only one common frequency for all the transmitters and receivers, Figure 8-16 will apply to
multi-terminal lines as well as two terminal lines. A blocking signal sent from any terminal will be received at all the other
terminals to provide the necessary blocking via the single receiver at that terminal.
b) FREQUENCY SHIFT CHANNEL
Frequency-shift channels are generally used in tripping type schemes. Figure 8-17 illustrates a three-terminal line tripping
scheme using a frequency-shift channel. This arrangement requires two receivers at each terminal. One receiver is
required for each remote transmitter because each transmitter is operated at a different frequency. In order to trip, a high-
shift output is required from both receivers concurrently to AND5. A two-terminal line scheme would require only one
receiver which would operate directly into AND1 without the need for AND5. Each channel has its own symmetry adjust-
ment.
8
Figure 8–18: TRIPPING SCHEME FOR 3-TERMINAL LINE
GE Multilin L60 Line Phase Comparison Relay 8-23