Digital Counters; Selector Switches; Flex States; Ethernet - GE L60 Instruction Manual

6.2 STATUS
PATH: ACTUAL VALUES

DIGITAL COUNTERS

Counter 1
The present status of the 8 digital counters is shown here. The status of each counter, with the user-defined counter name,
includes the accumulated and frozen counts (the count units label will also appear). Also included, is the date/time stamp
for the frozen count. The
PATH: ACTUAL VALUES

SELECTOR SWITCHES

The display shows both the current position and the full range. The current position only (an integer from 0 through 7) is the
actual value.
6
PATH: ACTUAL VALUES

FLEX STATES

There are 256 FlexState bits available. The second line value indicates the state of the given FlexState bit.
PATH: ACTUAL VALUES

ETHERNET

These values indicate the status of the primary and secondary Ethernet links.
6-6
STATUS DIGITAL COUNTERS
Counter 1
Counter 1
MESSAGE
Counter 1
MESSAGE
YYYY/MM/DD HH:MM:SS
Counter 1
MESSAGE
value refers to the microsecond portion of the time stamp.
Counter n MICROS
STATUS SELECTOR SWITCHES
SELECTOR SWITCH 1
POSITION: 0/7
SELECTOR SWITCH 2
MESSAGE
POSITION: 0/7
STATUS FLEX STATES
PARAM 1: Off
Off
PARAM 256: Off
MESSAGE
Off
STATUS ETHERNET
ETHERNET PRI LINK
STATUS: OK
ETHERNET SEC LINK
MESSAGE
STATUS: OK
L60 Line Phase Comparison Relay
DIGITAL COUNTERS Counter 1(8)
ACCUM:
0
FROZEN:
0
FROZEN:
MICROS:
0
Range: Current Position / 7
Range: Current Position / 7
Range: Off, On
↓
Range: Off, On
Range: Fail, OK
Range: Fail, OK
6 ACTUAL VALUES
6.2.9 DIGITAL COUNTERS
6.2.10 SELECTOR SWITCHES
6.2.11 FLEX STATES
6.2.12 ETHERNET
GE Multilin