Autoreclose; Remote Devices - GE L60 Instruction Manual

6 ACTUAL VALUES
PATH: ACTUAL VALUES STATUS

AUTORECLOSE 1

The automatic reclosure shot count is shown here.
a) STATUS
PATH: ACTUAL VALUES STATUS

REMOTE DEVICES

STATUS
MESSAGE
MESSAGE
The present state of up to 16 programmed Remote Devices is shown here. The
cates whether or not all programmed Remote Devices are online. If the corresponding state is "No", then at least one
required Remote Device is not online.
b) STATISTICS
PATH: ACTUAL VALUES STATUS
REMOTE DEVICE 1
MESSAGE
Statistical data (2 types) for up to 16 programmed Remote Devices is shown here.
The StNum number is obtained from the indicated Remote Device and is incremented whenever a change of state of at
least one DNA or UserSt bit occurs. The SqNum number is obtained from the indicated Remote Device and is incremented
whenever a GSSE message is sent. This number will rollover to zero when a count of 4,294,967,295 is incremented.
GE Multilin
AUTORECLOSE AUTORECLOSE 1
AUTORECLOSE 1
SHOT COUNT: 0
REMOTE DEVICES STATUS
All REMOTE DEVICES
ONLINE: No
REMOTE DEVICE 1
STATUS: Offline
↓
REMOTE DEVICE 16
STATUS: Offline
REMOTE DEVICES STATISTICS
REMOTE DEVICE 1
StNum: 0
REMOTE DEVICE 1
SqNum: 0
L60 Line Phase Comparison Relay
Range: 0, 1, 2, 3, 4
6.2.8 REMOTE DEVICES
Range: Yes, No
Range: Online, Offline
Range: Online, Offline
ALL REMOTE DEVICES ONLINE
REMOTE DEVICE 1(16)
6.2 STATUS
6.2.7 AUTORECLOSE
message indi-
6
6-5