Setting Up the Printer
Note
After installed the last option
that you want, print a configu-
ration page to confirm the in-
1
stallation. If the new device is
listed in the column of configu-
ration options, then it has been
properly installed. For more in-
formation on printing a config-
uration page, see P.37 "Printing
a Configuration Page".
24
Installing Printer Feature
Expander Type 185
Important
The memory unit can be damaged
by small amounts of static electric-
ity. Before touching it, ground
yourself by touching something
metal to remove static electricity
from you.
Note
If you install Printer Feature Ex-
pander Type 185 and Printer Hard
Disk Type 185, Printer Feature Ex-
pander Type 185 must be installed
first.
A
Confirm that the box contains the
following item.
• Memory
B
Turn off the printer, and remove
all cables and cords from the
printer.
C
Use a coin to remove the six
screws, and remove the printer
board cover.
Note
The removed cover and screws
are required in step E.
ZAEP010E