Remarks; Others - Ricoh SAVIN D0AP Service Manual

3. SP MODE TABLES (COMMON FOR BOTH MF
MODEL AND PRINTER MODEL)

3.1 REMARKS

The maximum number of characters on the control panel screen is limited to 30. For this reason,
some of the SP modes shown on the screen have been abbreviated. The following are
abbreviations used for the SP modes for which the full description is over 20 characters.
Item
Paper Weight
Paper Type
Paper Feed Station
Print Mode

3.1.1 OTHERS

The settings of each SP mode are explained in the right-hand column of the SP table in the
following way.
[Adjustable range / Default setting / Step] Alphanumeric
If "Alphanumeric" is written to the right of the bracket as shown above, the setting of
•
the SP mode shows on the screen using alphanumeric characters instead of only
numbers. However, the settings in the bracket in the SP mode table are explained by
using only the numbers.
The following symbols are used in the SP mode tables.
Notation
Engine SP
ENG
Controller SP
CTL
Design/Factory Use only: Do not touch these SP modes in the field.
DFU
SM
Thin paper: 52-59 g/m 2 , 13.9-15.7lb.
Plain Paper1: 60-74 g/m
Plain Paper2: 75-81 g/m
Middle Thick: 82-105 g/m
Thick Paper1: 106-157 g/m
N: Normal paper
MTH: Middle thick paper
TH: Thick paper
P: Paper tray
B: Bypass tray
S: Simplex
D: Duplex
What it means
3-1
Description
, 16-19.7lb.
2
, 20-21.6lb.
2
2 , 21.9-28lb.
2 , 28.3-41.9lb.
D0AP/D0C4/D0C5/D0C6/M0BQ/M0D1
Remarks