Scan Setting Screen - Icom IC-R8600 Instruction Manual

9
SCANS

Scan Setting screen

Configure the Scan on the Scan Setting screen.
1. Open the SCAN screen.
» SCAN
MENU
2. Touch [TYPE/SET].
SCAN screen
3. Touch [SET].
4. Touch to select the desired item.
SCAN SET screen
5. Touch to select the desired option.
L See the right column for setting items and options.
6. To close the SCAN SET screen, push
TIP: How to reset to the default setting
Touching the item or its option for 1 second displays
the Quick menu, and then touch "Default" to reset to
the default settings.
Temporary Skip Timer
Sets the period of time of the Temporary Skip timer.
The Skip timer ignores the Temporary Skip signal for
the set period of time.
• Options: 5, 10 and 15 minutes
SKIP function
Sets the Skip (SKIP or PSKIP) function.
• OFF: Turns OFF the function.
• ON:
Auto MW (Memory Write) SCAN Memory Clear
Selects the option to start an Auto Memory Write Scan.
• OFF: Starts an MW scan without clearing Auto
• Display Dialog:
• ON:
Display SCAN Screen (at SCAN START)
Selects whether or not to display the SCAN screen when
you push
• OFF: Does not display the SCAN screen.
• ON:
MAIN DIAL Operation (SCAN)
.
EXIT
Selects the scan operation when you rotate
• OFF: Cancels the scan.
• ON:
9-3
(You can use the Temporary Skip function (p. 9-10).)
The scan skips the memory channels that are
programmed as skip channels.
(Default: Display Dialog)
Write memory channels (A000 ~ A199).
Asks whether or not to clear Auto Write
memory channels (A000 ~ A199) before
starting an MW scan.
Automatically clears Auto Write memory
channels (A000 ~ A199) before starting an
MW scan.
to start a scan (except Priority scan).
Displays the SCAN screen.
during a scan.
Changes the scan direction.
Rotate right for an up scan, rotate left for a
down scan.
(Default: 5min)
(Default: ON)
(Default: ON)
(Default: Up/Down)