Options; Attaching The Mb-123 - Icom IC-R8600 Instruction Manual

Options

AD-55NS
AC adaptor
• 15 V/2 A
L The shape may differ,
depending on the version.
z CAB-1258 DC power cable ( approximately 3 m,
z MB-123 Carrying handle
Approved Icom optional equipment is designed for optimal performance when used with an Icom receiver. Icom
is not responsible for the destruction or damage to an Icom receiver in the event the Icom receiver is used with
equipment that is not manufactured or approved by Icom.

Attaching the MB-123

The optional MB-123 carrying handle with the rubber
feet is convenient for carrying the receiver.
1. Attach the rubber feet supplied with the MB-123 to
the receiver.
L To firmly attach, push-in the center part of the rubber feet.
2. Attach the carrying handle using the supplied
screws as shown to the right.
R WARNING!
NEVER use other than the screws
supplied with the MB-123.
SP-23
external speaker
• 4 W/8 Ω
L145.0(W)×111.0(H)×282.5(D) mm
5.7(W)×4.4(H)×11.1(D) mm
(Projections not included)
9.8 ft: repair parts)
Carrying handle
15-1
OPTIONS
SP-39AD
external speaker
-
with built in power supply
• 15 V/2 A
• 4 W/8 Ω
• Same height as the IC-R8600.
(Has a desktop stand.)
z RS-R8600 Remote control software
(Future product)
z CS-R8600 Programming Software
15
Rubber feet
(Supplied with MB-123)
Push-in the center part
Rubber feet
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21