Selecting A Memory Channel; Dselecting With; Dselecting Using The Keypad; Writing A Memory Channel - Icom IC-R8600 Instruction Manual

8
MEMORY OPERATION

Selecting a memory channel

z Rotate or
memory channel.
L Only the Memory channels that have contents are
displayed.
Memory mode
Group number
(Example: Memory channel 04)
D Selecting with
1. Push to select the Memory mode.
V/M
2. Rotate to select the desired memory channel.
D Selecting with
1. Push to select the Memory mode.
V/M
2. Push .
• LED on the
3. Rotate
D Selecting using the keypad
1. Touch the memory channel number.
• The VFO/MEMORY screen is displayed.
2. Push or
3. Touch [CH-INP].
4. Touch the numeric keys to enter the desired
memory channel number.
5. Touch [ENT] to set the entered memory channel.
6. Push to close the VFO/MEMORY screen.
Innormation : Selecting a memory channel in a different group
L
You can select the desired Memory channel stored in all memory channel groups.
1. Push , and touch [Channel Select Group Range].
2. Touch [All Groups].
3. Rotate to continuously select a memory channel
in all memory channel groups.
to select the desired
Channel number
key lights.
to select a memory channel.
to select the group.

Writing a memory channel

A single memory channel stores the frequency,
receive mode and IF filter width besides the following
items.
• Tuning step
• P.AMP ON/OFF
• ATT setting
• Antenna setting
• IP+ ON/OFF
• DUP mode
1. Set the frequency and receive mode and so on.
2. Push .
3. Touch to select the desired memory write option.
Memory write options
[Write to a New Channel]:
• The contents such as frequency and operating mode are
written to a blank channel in the selected group.
[Write to the Selected Channel]:
• The selected channel is overwritten.
[Select the Channel and Write]:
• The channel is written to the channel selected on the CH
SELECT screen.
Group
Channel
number
CH SELECT screen example
Memory
contents
Insert a new channel without overwriting
the selected channel.
8-2
• DUP direction
• TSQL/DTCS setting
• DIGITAL Squelch settings
• Memory name
• SKIP Setting
• SELECT Setting
Number of
remaining blank
Memory name
channels
(if entered)