Dsearching For The Peak Signal; Dtouch Screen Operation; Dmini Scope Screen - Icom IC-R8600 Instruction Manual

Spectrum scope screen (Continue)
D Searching for the peak signal
You can find the strongest signal within the scope
frequency range.
1. Open the SPECTRUM SCOPE screen.
» SCOPE
MENU
2. Touch [<1>] to select the [<2>] menu.
L Each touch toggles between menu [<1>] and [<2>].
3. Touch [PEAK].
The strongest signal
• The Peak Pointer appears on the strongest signal
frequency within the scope frequency range.
The strongest signal
Peak search mode
4. To exit the peak search menu, push
[Search menu keys]
Key
Touch to put the peak pointer on the strongest
SEARCH
signal frequency.
Turns the Hold function ON or OFF.
• "
HOLD
Touch
displayed. Freezes the current
HOLD
spectrum.
Touch for
Clears the Peak Hold level.
1 second
Enters to the Next Peak level mode.
NEXT • Popup "NEXT " is displayed.
LEV • Rotate
in level.
Enters to the Peak Select mode.
NEXT L/R • Popup "NEXT " is displayed.
• Rotate
Touch for 1 second to tune the frequency to
→RX
the current peak level signal.
Signal frequency
.
Action
" and the Marker are
to search for the next peak
to select the next peak.
D Touch screen operation
When you touch the FFT scope zone or the waterfall
zone on the SPECTRUM SCOPE screen, the area will
be zoomed in. Then, touch the signal in the zoomed
area to tune into the signal on the SPECTRUM
SCOPE screen.
1. Open the SPECTRUM SCOPE screen.
» SCOPE
MENU
2. Touch the Scope screen.
• The area around the touched point is zoomed in.
L Touch out of the zoomed area to close the zoomed
window.
3. Touch the signal in the zoomed area.
• The receiving frequency is tuned into the touched
signal frequency.
4. To exit the SPECTRUM SCOPE screen, push
D Mini scope screen
The Mini scope screen can be simultaneously
displayed with another function display, such as the
FSK DECODE screen.
z Push to turn the Mini scope screen ON or OFF.
M.SCOPE
Mini scope screen (with the Filter setting screen)
L Hold down
M.SCOPE
SPECTRUM SCOPE screen.
4-3
SCOPE OPERATION
for 1 second to display the
4
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
.
17
18
19
20
21