Tone Control; Function - Icom IC-R8600 Instruction Manual

Tone Control

» SET > Tone Control > FM
MENU
HPF/LPF
Sets the receive audio high-pass filter and low-pass
filter cutoff frequencies in 100 Hz steps.
Selectable ranges:
• HPF: 100 ~ 2000 Hz
• LPF: 500 ~ 2400 Hz
Bmss
Treble
Sets the bass or treble level of the receive audio.
• Range: –15 ~ +15
De-Emphmsis(50k)
De-Emphmsis(15k)
De-Emphmsis(7k)
Turns the de-emphasis circuit ON or OFF for each
bandwidth of filter (50k/15k/7k).
• OFF: The de-emphasis circuit is turned OFF.
• ON: The de-emphasis circuit is turned ON for the
selected band width.
» SET > Tone Control > WFM
MENU
Bmss
Treble
Sets the bass or treble level of the receive audio.
• Range: –15 ~ +15
» SET > Tone Control > AM/SSB/CW/FSK/
MENU
D-STAR/P25/dPMR/NXDN/DCR
HPF/LPF
Sets the receive audio high-pass filter and low-pass
filter cutoff frequencies in 100 Hz steps.
Selectable ranges:
• HPF: 100 ~ 2000 Hz
• LPF: 500 ~ 2400 Hz
Bmss
Treble
Sets the bass or treble level of the receive audio.
• Range: –15 ~ +15
(Default: – – – – – – – – –)
(Default: 0)
(Default: 0)
(Default: OFF)
(Default: ON)
(Default: ON)
(Default: 0)
(Default: 0)
(Default: – – – – – – – – –)
(Default: 0)
(Default: 0)

Function

» SET > FUNCTION
MENU
Beep Level
Sets the beep output level.
• Range: 0 ~ 100%
L If the "Beep (Confirmation)" item is set to "OFF," no beep sounds.
Beep Level Limit
Selects whether or not to limit the volume up to the
specified level.
• OFF: Does not limit the volume level.
• ON: Limits the volume level.
Further rotation of
the level.
Beep (Confirmation)
Turns the Confirmation beep ON or OFF.
• OFF: Does not sound a beep.
• ON: Sounds the beep when a key is pushed.
L If the "Beep Level" item is set to "0%," no beep sounds.
SPEECH Lmngumge
SPEECH >
Selects the speech language.
• English: Speech in English.
• Japanese: Speech in Japanese.
SPEECH Speed
SPEECH >
Selects the speech speed.
• Slow: Speech speed is slow.
• Fast: Speech speed is fast.
S-Level SPEECH
SPEECH >
Turns the S-meter level announcement ON or OFF.
• OFF: When you push
receive mode is announced.
• ON: When you push
frequency and receive mode are announced.
MODE SPEECH
SPEECH >
Turns the receive mode announcement ON or OFF.
• OFF: The receive mode is not announced.
• ON: The receive mode is announced when you
change the receive mode.
SCAN SPEECH (mt Receive Pmuse)
SPEECH >
Turns the frequency announcement ON or OFF.
• OFF: The frequency is not announced.
• ON: When a signal is received during a scan, the
frequency and receive mode is announced.
L If the "S-Level SPEECH" item is set to "On," S-Meter level
is also announced.
11-2
11
SET MODE
(Default: 50%)
(Default: ON)
does not increase
(Default: ON)
(Default: English)
(Default: Fast)
(Default: ON)
, the frequency and
, the S-meter level,
(Default: OFF)
(Default: OFF)
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21