Main Screen - Icom IC-R8600 How-To Manual

Click to display the Sound
Card selection screen.
Click to select the sampling
rate value.
L The needed output
sampling rate depends on
the receiving mode.
Click to start or
stop receiving.

Main Screen

Tune frequency Marker
Click to set the Tune frequency.
Click to set the LO frequency.
Click to select the receiving mode.
Click to quit the software.
L The receiver automatically returns to the normal
(Local) mode after closing the software.
2
Waterfall Display (RF)
Spectrum Display (RF)
Waterfall Display (AF)
Spectrum Display (AF)
Click to display the IC-R8600
I/Q Settings screen. (p. 3)
Adjust the audio level.
(This is only an example.)