Timer; Dsetting The Sleep Timer; Dsetting The Daily Timer - Icom IC-R8600 Instruction Manual

10
Clock and Timer

Timer

D Setting the Sleep timer
The Sleep timer automatically turns OFF the receiver
power after the set period of time ends.
• Settable range : 5 ~ 120 minutes (in 5 minutes steps)
1. Hold down for 1 second.
2. Touch [Sleep Timer].
3. Rotate to set the desired length of time.
4. Touch [SET].
• The timer LED
• 10 seconds before the sleep timer period ends, the
receiver starts sounding beeps and the timer LED
blinking, then turns OFF.
L When the sleep timer ends, the time period set in
step 3 is cleared.
LEach push of
5. To close the TIMER screen, push
times.
NOTE: About the Timer accuracy
Since the Sleep timer counts in 'minute' steps (not
counts in 'second' steps), it may have maximum 59
seconds of error.
lights orange.
stops and resumes the timer.
several
EXIT
D Setting the Daily timer
The IC-R8600 automatically turns power ON or OFF
on the specified day and time.
LYou can set up to 3 timer slots for different timer setting.
1. Hold down
2. Touch to select a timer slot.
TIMER screen
3. Rotate
(Example: TIMER1).
LSee page 10-3 for each item's details.
LPush
4. After you configure the Timer, touch [<<Set>>].
• The "Set Timer?" dialog appears.
5. Touch [YES].
• The timer LED
L When the Power OFF Timer is set: 10 seconds before
the sleep timer period ends, the receiver starts sounding
beeps and the timer LED blinking, then turns OFF.
LEach push of
Power ON time
Day of the week
Timer activated
Reserved channel
6. To close the TIMER screen, push
10-2
for 1 second.
to set each item for the timer slot.
to reset to the default setting or cancel.
lights orange.
stops and resumes the timer.
Repeat ON
Power OFF time
several times.
EXIT