Save Custom Defaults; Upload/Download Connection; B00 Motor Menu - Zener MSC-3 Instruction Manual

MSC-3 Start Up
The message is intended as a warning and an opportunity to confirm that terminal wiring is suited to the
factory default settings, otherwise unexpected drive operation may result.
• Pressing the  button will cause the following message to appear:
• Press  again to load factory defaults as the current set of parameters OR
• Press ESC to continue with the existing set of parameters

Save Custom Defaults?

It is recommended to save newly configured parameters after an MSC-3 is first set up for an application.
Called "Custom Defaults", new and existing parameters form a known configuration that serve as a
reference for future changes to the MSC-3 and its application. This menu provides a way to save the
current set of parameters as the "Custom Defaults".
By loading custom defaults the MSC-3 may be restored to a known configuration after many parametric
changes have been made.
• Press  to store the current set of parameters as commissioned defaults OR
• Press ESC to abandon parameter storage.

Upload/Download Connection

To facilitate MSC-3 configuration and software update an upload / download connection may be
established to a computer. The connection provides a convenient transfer of configuration and software
code files. To minimise hazardous operation the upload / download connection operates off-line. As a
result the MSC-3 must be in LOCAL mode and the motor stopped before prior to connecting.

B00 MOTOR Menu

This menu allows for the entry of motor nameplate information. Press ▲ / ▼ buttons to view and modify
motor volts, motor amps, motor Hz and motor rpm.
70
CAUTION!
MOTOR MAY START
WITHOUT NOTICE
CHECK WIRING
CAREFULLY...
CONTINUE WITH
CUSTOM LOAD?
Save Custom
Defaults?
IM00120 IM00120