Load Factory Defaults; Load Custom Defaults - Zener MSC-3 Instruction Manual

Load Factory Defaults?

This menu allows the factory default parameters to be reinstalled.
The MSC-3 must be in LOCAL mode and the motor stopped before loading factory defaults.
• Pressing the  button will cause the following message to appear:
The message is intended as a warning and an opportunity to confirm that terminal wiring is suited to the
factory default settings, otherwise unexpected drive operation may result.
• Pressing the  button will cause the following message to appear:
• Press  again to load factory defaults as the current set of parameters OR
• Press ESC to continue with the existing set of parameters

Load Custom Defaults?

Typically when the MSC-3 is first commissioned for operation parametric changes are made to suit the
application. Once the desired operational configuration is settled, it is recommended that all parameters
are stored to Custom defaults. This menu allows custom default parameters to be reinstalled to regain
original operating characteristics.
The MSC-3 must be in LOCAL mode and the motor stopped before loading custom defaults.
• Pressing the  button will cause the following message to appear:
Load Factory
Defaults?
CAUTION!
MOTOR MAY START
WITHOUT NOTICE
CHECK WIRING
CAREFULLY...
CONTINUE WITH
FACTORY LOAD?
Load Custom
Defaults?
IM00120 IM00120
MSC-3 Instruction Manual
69