S00 Service; Version Display; Motor Ol" (I2T) Display; Mains Input Display - Zener MSC-3 Instruction Manual

MSC-3 Start Up

S00 SERVICE

The S00 SERVICE menu is a collection of displays and menus specifically for service and service
personnel and so summarised description of each display and menu follows

Version display

This display reveals the software version in operation without having to restart the drive.

"Motor OL" (I2t) display

This display reveals the state of the thermal overload protection feature.

Mains input display

This display reveals the Vab & Vbc mains input magnitude measurement.

Vbus display

"OK" if Vbus > min(Vbus),
blank otherwise.
Vbus
Vin
"~" indicates an input phase is alternating
with suf cient amplitude, blank otherwise.
This display reveals the Vbus measurement with: relay pull in condition; bus charge peak condition,
mains zero crossing condition and power failure indication.

S04 FAN OVERRIDE

Available Choices:
Press  once to begin.
Use the ▲ / ▼ buttons to enable or disable fan override.
Press  to confirm the choice.
116
R40
Ver 5.0.0h
I2t used
Vab
Vbc
605.2V OK ^
P
416.1V ~~
S04 FAN OVERRIDE
> DISABLED
ENABLED
DISABLED
0.0A
415.3 Vac
416.1 Vac
"^" if Vin_peak > min(Vin_peak),
blank otherwise.
F
PF is displayed when power fail is
detected, blank otherwise.
IM00120 IM00120