G04 Rl2; G040 Rl2 Signal; G041 Rl2 Sense; G042 Rl2 Ton - Zener MSC-3 Instruction Manual

MSC-3 Start Up
• Press ESC to abandon the value change.
In some instances it is desirable to delay the de- activation of a relay to assist with signal interlock for
example. This parameter sets the relay off delay for relay #1

G04 RL2(17,18)

As standard the MSC-3 is equipped with 2 relays each with a single normally open contact. This menu
allows configuration of Relay #2 (RL2 on the terminal strip). Configuration parameters include: a relay
signal function selection, relay signal inversion option and delay on and off interval specifications.

G040 RL2 Signal

Available choices:
• Press  once to begin input selection.
• Use the ▲ / ▼ buttons to select the output function for relay #2 operation.
• Press  to confirm the choice. ESC to abandon the change.

G041 RL2 Sense

Available Choices:
• Press  once to begin input selection.
• Use the ▲ / ▼ buttons to select direct or inverted relay operation.
• Press  to confirm the choice. ESC to abandon the change.
This menu allows relay #2 to be inverse acting for those applications that need normally closed contact
behaviour.

G042 RL2 TON

Range: 0...600 seconds
• Press  to edit the value.
• Press ▲/ ▼ to make changes to the value.
• Press  to accept the new value OR
100
G040 RL2 Signal
> RUN
(See the list for Relay Output Functions)
G041 RL2 Sense
> DIRECT
> DIRECT
> INVERT
G042 RL2 TON
0 secs
IM00120 IM00120