F09 Comms Preset; F10 Presets; F100 Preset1 To F107 Preset8 - Zener MSC-3 Instruction Manual

MSC-3 Start Up

F09 COMMS PRESET

Range: -100.0...100.0 % of C03 MAX Hz
• Press  to edit the value.
• Press ▲/ ▼ to make changes to the value.
• Press  to accept the new value OR
• Press ESC to abandon the value change.
The F09 COMMS PRESET parameter is the power-on value for the > COMMS REF reference. The
> COMMS REF is the reference by the operating communication network protocol.In the event that
communications is lost, the COMMS REF reference will automatically revert to the F09 COMMS
PRESET parameter value. See G168 Comms Lost Time on page 112 for further details. Setting G168
Comms Lost Time to zero disables the detection of communications loss.

F10 PRESETS

There are 8 preset references for the MSC-3. Most are used in conjunction with the Reference Selector.
Each preset is expressed as a percentage of C03 MAX Hz.

F100 PRESET1 to F107 PRESET8

F100 PRESET 1
10.0%
F101 PRESET 2
20.0%
F102 PRESET 3
30.0%
F103 PRESET 4
40.0%
Range: -100.0...100.0 % of C03 MAX Hz
• Press  to edit the value.
• Press ▲/ ▼ to make changes to the value.
• Press  to accept the new value OR
• Press ESC to abandon the value change.
88
F09 COMMS PRESET
60.0%
F104 PRESET 5
50.0%
F105 PRESET 6
60.0%
F106 PRESET 7
70.0%
F107 PRESET 8
80.0%
IM00120 IM00120